2.4Ghz 4ch Corona Receiver (DSSS) V2 - Hobby Great Wall Co.,Limited

2.4Ghz 4ch Corona Receiver (DSSS)

Important Disclaimer Notice:

Please read this link before buying Corona Receiver Glitching Problems. and do some research on www.rcgroups.com
We are giving you the option of buying these knowing of the faults or not buying them at all. We took these modules and receivers off the site but due to customer requests we put them back on. You buy this at your own risk. We are putting everything out in the open and giving you the choice. Anyone who buys one and then returns it due to any of the above faults WILL be charged a 20% administration fee. Please don’t complain about this – if you are not happy with the terms, don’t buy it.

Specification

Operating current : 30 MA
Size : 38mm*17mm*4mm
Sensitivity : -100dbm
Voltage : 4.8 V - 6V
Latency : 22ms
range : more than 2100m

Corona 2.4Ghz Receiver. (FHSS) ***V1 and V2 are not compatible. Please ensure your Tx module is V2. ***Both Futaba and JR Corona V2 modules can be used.

All Corona 2.4ghz is V2 unless stated otherwise. Some receivers have one antenna some have two. This has no bearing whatsoever on performance and is for aesthetic reasons only. See this post for confirmation. Corona Antenna 1 vs 2 Post.

We take no responsibility for any compatibility or performance issues you may have with these. Faulty items will of course be refunded, but it is upto you to research additional information on range, performance and compatibility. The specifications stated on the website are the manufacturer’s specs and have NOT been independently verified. Actual performance may vary.

Please be aware, you are buying this - not testing it.