Add to Favorites   |   Set Homepage
Home   |  About Us   |  News   |  Products   |  Network   |  Message   |  Contact Us
Product List
New Arrivals
Planes Stuff
Boat Stuff
Car & Tank
EDF
FPV Stuff
RC Propellers
RC Simulators
Tx/Rx Parts and Systems
Tools/Equipment
Brushless Motor
Lipo Battery
Lipo Charger
Speed Controller
Servos
RC Spares And Accessories
RC Electronics
Toys
Single-side PCB Board Series
Cable Products Series
Wire and Cables
DC Motor
AC Motor
 
      Product Search     
Home > Product List > RadioLink2.4ghz6-ChannelMode2DigitalTransmitterHeliVersion

 
Overview >>


Key Features:
Digital Display
6-channel 2.4GHz transmitter with servo reversing.
Easy to use control for basic models.
Includes 6-channel receiver
800 meter ground range

Included;
1 x 2.4Ghz transmitter
1 x 2.4Ghz Receiver
There is no bind plug - see review " The bind procedure is the easiest, quickest, no fuss seen to date, this is done by powering up the transmitter and receiver, then a tiny button positioned at the end of the receiver case is pressed once." It is inside the rectangular hole.

T6HP 2.4GHZ RC SYSTEM

Easy mode change
This is a 6 function 2.4GHZ transmitter supplied with a matching 6 channel receiver. The example tested is a basic computer unit with a small easy to read top mounted LCD display. Helicopter flyers should find the transmitter’s functions are adequate for many types of model. Specific functions available are, model memory, servo reversing, exponentials, dual rates, throttle curve, idle up pitch curve, throttle hold, revo, swash plate select etc. Stick mode change is easy and involves swapping the throttle stick friction lever and some electronic changes made via the LCD screen. This particular unit has electronically operated trim button/switches rather than the electro mechanical lever type.

Audible warning
When checked on a power supply, the transmitter has a loud bleeper to indicate that the batteries are becoming discharged. The audible low voltage warning starts to operate at 8.4 volts. Either long life alkaline AA cells or NMH rechargeable cells can be used in the clip in battery holder. A standard charging jack is installed on one side of the transmitter. The small but useful instruction booklet provided covers all aspects of the computer programming section in reasonable detail. This is generally well written and easy to understand having been translated into a good standard of English which is a pleasant surprise. Numerous illustrations regarding the LCD and transmitter programming have been included.

Very fast bind
As with the non computer systems tested, the bind procedure is amazingly fast and without any fuss. Having plugged in a servo or 2 and suitable battery, the units are ready for the binding procedure. With both units switched on, the receivers green LED will be illuminated. After gently pressing the bind button in the centre of receiver case end, the LED will flash a few times then stop as the bind procedure is completed in a matter of seconds. The R6DH receiver is generic to both T6HP and T4U 2.4GHZ systems. Due to the immense choice of servos now available, none are supplied with this transmitter-receiver combination. Although orientated towards helicopters, this combo outfit should also find favour with fixed wing sport model flyers who want an easy to use computer transmitter.

Range
A basic but impressive ground range test was done at a flying field with the receiver, 2 servos and a battery pack hung in a tree about 5 feet above ground level. This test involved the transmitter being unfairly taken down a slope making it out of line of sight and below the operating horizon, yet a positive lock was maintained at all times.

Conclusion: Outstanding value for money. This is no nonsense easy to set up, plug and play entry level computer radio. Ideal for those who may dislike the very complex systems which often need the huge user manual to be carried at all times.
 
 
 
 
Next:RadioLink 2.4ghz 4-Channel Mode2 Transmitter
Previous:Radiolink 2.4ghz 6-Channel Mode2 Digital Transmitter Plane Version
 
Home   |  About Us   |  News   |  Products   |  Network   |  Message   |  Contact Us
Copyright:Hobby Great Wall Co.,Limited Address:No 801, Gate 5, Liren Garden, Hudai Town, Wuxi City, Jiangsu Province
Tel:86-510-85591634 Fax:86-510-85591634 E-mail:hobbygreatwall@126.com Web:www.hobbygreatwall.com   Sitemap   
外贸网站:Kogin