Add to Favorites   |   Set Homepage
Home   |  About Us   |  News   |  Products   |  Network   |  Message   |  Contact Us
Product List
New Arrivals
Planes Stuff
Boat Stuff
Car & Tank
FPV Stuff
RC Propellers
RC Simulators
Tx/Rx Parts and Systems
Brushless Motor
Lipo Battery
Lipo Charger
Speed Controller
RC Spares And Accessories
RC Electronics
Single-side PCB Board Series
Cable Products Series
Wire and Cables
DC Motor
AC Motor
      Product Search     
Home > Product List > Vstone Robovie-X Kit

Overview >>


Come explore the world of educational robotics and learn the fundamentals of robotics, motion control and programming.

The Robovie-X can be controlled using a standard wireless PS2 gamepad controller, is easy to use and offers endless hours of entertainment. The Robovie-X was designed to offer an entertaining, low-cost alternative to high-end robotics, while stylishly combining the latest in sleek design and cutting-edge robotics engineering.

The robot also comes with an easy to use programming interface, which is without a doubt the most user-friendly programming utility to date and requires little to no prior experience with robotics or programming.

Audio output / analog input
Walking, running, somersaulting and standing up from a face-down or up position
It can also be programed to stand up autonomously after it has fallen over
Is fully loaded with over 75 pre-programmed acrobatic motions
Can do standard movements like cartwheels and back flips or play music
Dance and expressive behavior like falling asleep

Degrees of Freedom: 17 in Total
Servo: 17 x VS-S092J
Sensors: Each servo has an embedded sensor for detecting the servo's position in real time.
CPU: H8 60MHz HV processor with 512kB ROM / 64kB RAM
Charger: AC100V charger
Communication with PC: RS232C (115kbps) or USB
External I/F: Playstation 2 Style Wireless Gamepad Remote (included)
Software: Comes with the easy to use "RobovieMaker" programming software. The software is easily installable to a standard windows based PC, and can be uploaded to the robot via serial connection.

13.5 inches

What's in the Box:
Robovie-X robot (unassembled)
VS-LED1 (LED control expansion board)
Cable (USB)
Battery (pack, 6V 1400mAh NiMH)
Battery charger
CDROM (RobovieMaker2)
User guide

Next:Beginner 'Robovie-X Lite (KT-X Lite)'
Previous:Deans style Micro connector Plugs x 10 pairs
Home   |  About Us   |  News   |  Products   |  Network   |  Message   |  Contact Us
Copyright:Hobby Great Wall Co.,Limited Address:No 801, Gate 5, Liren Garden, Hudai Town, Wuxi City, Jiangsu Province
Tel:86-510-85591634 Fax:86-510-85591634   Sitemap