Programmable 0.11sec/60degree 14.5kg.cm HV Digital Servo Fi7614M
|
FITEC
MODEL |
SIZE
(mm) |
WEIGHT |
SPEED |
Stall Torque |
|
| |
|
SKU |
(LxWxH) |
g |
oz |
sec/60° |
kg.cm |
oz.in |
|
|
Fi7614M
|
40.2x20x38.6 |
56
|
1.98 |
0.13(7.4V)
0.11(8.4V) |
12.1(7.4V)
14.5(8.4V) |
168(7.4V)
201.4(8.4V) |
Operating Voltage :6V~8.4V
Control System :Digital
Direction :CW
Operating Angle :180degree
Required Pulse :500us-2500us
Bearing Type :2BB
Gear Type :Metal
Motor Type :Coreless
Connector Wire Length :30 cm
Fi7614M is FEETECH Programmable Digital Servo.
You need to use an USB interface (FE-SCPC-1) to program this servo. (For more information, please click here)
This servo is used in cars, boats, robots or where standard servos are used.
This servo can produce high-current draw from your batteries. If using NiMH or LiPo batteries, make sure they are capable of delivering approximately 2A for each servo.
Features:
Standard Size Two Ball Bearing High Speed Programmable Digital Servo
Used 1 million times life potentiometer, high quality coreless motor.
Has the waterproof properties.
Can be programming angle of rotation to use USB interface by PC software.
Ideal for high-torque applications requiring a standard size servo
Universal connector fits Futaba, Hitec, JR, KO Propo.
One year warranty
Servo programmable function
1. FAIL SAFE, On or Off
2. Direction of Rotation
3. Travel Speed
4. Servo Max Torque limit and Punch
5. Center, End, and FAIL SAFE Point
6. Signal Pulse Set-Up
7. Stretch (Holding Power, Running Power, Acceleration and Deceleration)
8. Dead Band Width
9. Resolution Setup
10.“Save and Open” File Options
11. Reset Factory Default Data
12. Read and Write Servo Data
Requires:
FE-SCPC-1(If you need to programming this servo)
Full Packaged
-Servo×1PCS
-Servo arm×1 bag
-Carton box
-GW 90g
